第56回 有馬記念（グランプリ）（GI） テーマの詳細 2011/12/25(Sun) 「一年の想い、そして明日への夢を乗せた大一番！」 第56回 有馬記念（グランプリ）（GI）のことなら何でもOKです。 テーマ投稿数 223件 参加メンバー 71人 管理人 UmaDra 管理画面 hunter×hunter(2011)「第56話 サイアイ×ト×サイアク」のアニメ情報、感想、評価を見ることができるページ。登録をすれば、自分のアニメ記録もつけられます。 Mercury in other High Pressure Sodium (vapour) lamps for general lighting purposes not exceeding (per burner): No limitation of use until 31 December 2011; 25 mg may be used per burner after 31 December 2011, Mercury in High Pressure Mercury (vapour) lamps (HPMV), Mercury in other discharge lamps for special purposes not specifically mentioned in this Annex, Lead in glass of fluorescent tubes not exceeding 0,2 % by weight, Lead as an alloying element in steel for machining purposes and in galvanised steel containing up to 0,35 % lead by weight, Lead as an alloying element in aluminium containing up to 0,4 % lead by weight, Copper alloy containing up to 4 % lead by weight, Lead in high melting temperature type solders (i.e. 1. 2. Where other applicable Union legislation contains provisions for the affixing of the manufacturer’s name and address which are at least as stringent, those provisions shall apply; manufacturers who consider or have reason to believe that EEE which they have placed on the market is not in conformity with this Directive immediately take the necessary corrective measures to bring that EEE into conformity, to withdraw it or recall it, if appropriate, and immediately inform the competent national authorities of the Member States in which they made the EEE available to that effect, giving details, in particular, of the non-compliance and of any corrective measures taken; manufacturers, further to a reasoned request from a competent national authority, provide it with all the information and documentation necessary to demonstrate the conformity of the EEE with this Directive, in a language which can be easily understood by that authority, and that they cooperate with that authority, at its request, on any action taken to ensure compliance with this Directive of EEE which they have placed on the market. 占いが出来るだからイコール高収入という事には繋がっていません。 Exemptions from the restriction for certain specific materials or components should be limited in their scope and duration, in order to achieve a gradual phase-out of hazardous substances in EEE, given that the use of those substances in such applications should become avoidable. 2. 工藤ちあきのセクシー・ヌード画像【厳選30枚】 2011/06/02. Mercury in double-capped linear fluorescent lamps for general lighting purposes not exceeding (per lamp): Tri-band phosphor with normal lifetime and a tube diameter < 9 mm (e.g. 大胆な予想を待っています！, 占いは勉強したから出来る、と答える優等生が最近特に多いのですが セミヌードになった芸能人. Lead and cadmium in atomic absorption spectroscopy lamps. Procedures for assessing the conformity of EEE subject to this Directive should be consistent with relevant Union legislation, in particular Decision No 768/2008/EC of the European Parliament and of the Council of 9 July 2008 on a common framework for the marketing of products (15). しかしその当時の1、2着馬のレッドディザイア、ブロードストリートも参戦で、熱い再戦が繰り広がれる。 2020/03/17（火）開催　 3. 2011年12月25日 5回中山8日目 3歳以上オープン (国際)(指)(定量) Lead, cadmium and mercury in detectors for ionising radiation. This Directive should be without prejudice to the obligations of the Member States relating to the time-limits for transposition into national law and application of the Directive set out in Annex VII, Part B. Radioactive cadmium isotope source for portable X-ray fluorescence spectrometers. For the purposes of this Directive, no more than the maximum concentration value by weight in homogeneous materials as specified in Annex II shall be tolerated. The conformity marking applicable for products at Union level, CE marking, should also apply to EEE that is subject to this Directive. If such a notified body certifies that the safety of the potential substitute for the intended use in medical devices or in vitro diagnostic medical devices is not demonstrated, the use of that potential substitute will be deemed to have clear negative socioeconomic, health and consumer safety impacts. induction lamps). The existing exemption shall remain valid until a decision on the renewal application is taken by the Commission. 予想、回顧、データ分析などに関するブログのトラックバック集 Paragraph 1 shall not apply to reused spare parts, recovered from EEE placed on the market before 1 July 2006 and used in equipment placed on the market before 1 July 2016, provided that reuse takes place in auditable closed-loop business-to-business return systems, and that the reuse of parts is notified to the consumer. 1. Cases in which obligations of manufacturers apply to importers and distributors. 「見逃すな！この秋の女王決定戦！」 Formal objection to a harmonised standard. Having regard to the opinion of the Committee of Regions (2). Lead, cadmium and mercury in infra-red light detectors. Mercury in single capped (compact) fluorescent lamps not exceeding (per burner): For general lighting purposes < 30 W: 5 mg, Expires on 31 December 2011; 3,5 mg may be used per burner after 31 December 2011 until 31 December 2012; 2,5 mg shall be used per burner after 31 December 2012, For general lighting purposes ≥ 30 W and < 50 W: 5 mg, Expires on 31 December 2011; 3,5 mg may be used per burner after 31 December 2011, For general lighting purposes ≥ 50 W and < 150 W: 5 mg, For general lighting purposes ≥ 150 W: 15 mg, For general lighting purposes with circular or square structural shape and tube diameter ≤ 17 mm, No limitation of use until 31 December 2011; 7 mg may be used per burner after 31 December 2011. Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products (10) enables specific ecodesign requirements to be set for energy-related products which may also be covered by this Directive. 3. ・バナーを変更したい場合は、必ず画像に「テーマ」の文字かバナーロゴを重ねてください。 Even if waste EEE were collected separately and submitted to recycling processes, its content of mercury, cadmium, lead, chromium VI, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE) would be likely to pose risks to health or the environment, especially when treated in less than optimal conditions. 1. are used for liquid crystal displays, design or industrial lighting), Lead oxide in seal frit used for making window assemblies for Argon and Krypton laser tubes, Lead in solders for the soldering of thin copper wires of 100 μm diameter and less in power transformers, Lead in cermet-based trimmer potentiometer elements, Mercury used as a cathode sputtering inhibitor in DC plasma displays with a content up to 30 mg per display, Lead in the plating layer of high voltage diodes on the basis of a zinc borate glass body, Cadmium and cadmium oxide in thick film pastes used on aluminium bonded beryllium oxide, Cadmium in colour converting II-VI LEDs (< 10 μg Cd per mm2 of light-emitting area) for use in solid state illumination or display systems, Applications exempted from the restriction in Article 4(1) specific to medical devices and monitoring and control instruments, Equipment utilising or detecting ionising radiation. For the purposes of this Directive, the following definitions shall apply: ‘electrical and electronic equipment’ or ‘EEE’ means equipment which is dependent on electric currents or electromagnetic fields in order to work properly and equipment for the generation, transfer and measurement of such currents and fields and designed for use with a voltage rating not exceeding 1 000 volts for alternating current and 1 500 volts for direct current; for the purposes of point 1, ‘dependent ‘ means, with regard to EEE, needing electric currents or electromagnetic fields to fulfil at least one intended function; ‘large-scale stationary industrial tools’ means a large-scale assembly of machines, equipment, and/or components, functioning together for a specific application, permanently installed and de-installed by professionals at a given place, and used and maintained by professionals in an industrial manufacturing facility or research and development facility; ‘large-scale fixed installation’ means a large-scale combination of several types of apparatus and, where applicable, other devices, which are assembled and installed by professionals, intended to be used permanently in a pre-defined and dedicated location, and de-installed by professionals; ‘cables’ means all cables with a rated voltage of less than 250 volts that serve as a connection or an extension to connect EEE to the electrical outlet or to connect two or more EEE to each other; ‘manufacturer’ means any natural or legal person who manufactures an EEE or who has an EEE designed or manufactured and markets it under his name or trademark; ‘authorised representative’ means any natural or legal person established within the Union who has received a written mandate from a manufacturer to act on his behalf in relation to specified tasks; ‘distributor’ means any natural or legal person in the supply chain, other than the manufacturer or the importer, who makes an EEE available on the market; ‘importer’ means any natural or legal person established within the Union, who places an EEE from a third country on the Union market; ‘economic operators’ means the manufacturer, the authorised representative, the importer and the distributor; ‘making available on the market’ means any supply of an EEE for distribution, consumption or use on the Union market in the course of a commercial activity, whether in return for payment or free of charge; ‘placing on the market’ means making available an EEE on the Union market for the first time; ‘harmonised standard’ means a standard adopted by one of the European standardisation bodies listed in Annex I to Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations and of rules on Information Society services (19) on the basis of a request made by the Commission in accordance with Article 6 of Directive 98/34/EC; ‘technical specification’ means a document that prescribes technical requirements to be fulfilled by a product, process or service; ‘CE marking’ means a marking by which the manufacturer indicates that the product is in conformity with the applicable requirements set out in Union harmonisation legislation providing for its affixing; ‘conformity assessment’ means the process demonstrating whether the requirements of this Directive relating to an EEE, are met; ‘market surveillance’ means the activities carried out and measures taken by public authorities to ensure that EEE complies with the requirements set out in this Directive and does not endanger health, safety or other issues of public interest protection; ‘recall’ means any measure aimed at achieving the return of a product that has already been made available to the end user; ‘withdrawal’ means any measure aimed at preventing a product in the supply chain from being made available on the market; ‘homogeneous material’ means one material of uniform composition throughout or a material, consisting of a combination of materials, that cannot be disjointed or separated into different materials by mechanical actions such as unscrewing, cutting, crushing, grinding and abrasive processes; ‘medical device’ means a medical device within the meaning of point (a) of Article 1(2) of Directive 93/42/EEC and which is also EEE; ‘in vitro diagnostic medical device’ means an in vitro diagnostic medical device within the meaning of point (b) of Article 1(2) of Directive 98/79/EC; ‘active implantable medical device’ means any active implantable medical device within the meaning of point (c) of Article 1(2) of Council Directive 90/385/EEC of 20 June 1990 on the approximation of the laws of the Member States relating to active implantable medical devices (20); ‘industrial monitoring and control instruments’ means monitoring and control instruments designed for exclusively industrial or professional use; ‘availability of a substitute’ means the ability of a substitute to be manufactured and delivered within a reasonable period of time as compared with the time required for manufacturing and delivering the substances listed in Annex II; ‘reliability of a substitute’ means the probability that an EEE using a substitute will perform a required function without failure under stated conditions for a stated period of time; ‘spare part’ means a separate part of an EEE that can replace a part of an EEE. In order to ensure uniform conditions for the implementation of this Directive, particularly with regard to the guidelines and format of applications for exemptions, implementing powers should be conferred on the Commission. This document is an excerpt from the EUR-Lex website, Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment Text with EEA relevance, Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment Text with EEA relevance, OJ L 174, 1.7.2011, p. 88–110 (BG, ES, CS, DA, DE, ET, EL, EN, FR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)Special edition in Croatian: Chapter 15 Volume 032 P. 147 - 169, In force: This act has been changed. 世紀の無敗３冠馬の行末とは。。。, JRA重賞レースを対象とした6月21日（日）～9月13日（日）まで開催のサマーシリーズに関する予想・分析など The powers to adopt the delegated acts referred to in Article 4(2), Article 5(1) and Article 6 shall be conferred on the Commission for a period of 5 years from 21 July 2011. キルア＆ヒソカ押しです( 'ω' و(و"♪ 名前：匿名（118.105.51.xxx） 2019/11/27 15:54:14. Applications for exemptions, renewal of exemptions or, mutatis mutandis, for revoking an exemption may be submitted by a manufacturer, the authorised representative of a manufacturer, or any economic operator in the supply chain and shall include at least the following: the name, address and contact details of the applicant; information on the material or component and the specific uses of the substance in the material and component for which an exemption, or its revocation, is requested and its particular characteristics; verifiable and referenced justification for an exemption, or its revocation, in line with the conditions established in Article 5; an analysis of possible alternative substances, materials or designs on a life-cycle basis, including, when available, information about independent research, peer-review studies and development activities by the applicant and an analysis of the availability of such alternatives; information on the possible preparation for reuse or recycling of materials from waste EEE, and on the provisions relating to the appropriate treatment of waste according to Annex II to Directive 2002/96/EC; the proposed actions to develop, request the development and/or to apply possible alternatives including a timetable for such actions by the applicant; where appropriate, an indication of the information which should be regarded as proprietary accompanied by verifiable justification; when applying for an exemption, proposal for a precise and clear wording for the exemption; Name and address of the manufacturer or his authorised representative: This declaration of conformity is issued under the sole responsibility of the manufacturer (or installer): Object of the declaration (identification of EEE allowing traceability. 今年は、前回の秋華賞で断然の1番人気に支持されながらも、不運な降着で連にも絡めなかった3歳女傑ブエナビスタが雪辱参戦。 Paragraph 1 shall not apply to the applications listed in Annexes III and IV. Mercury in cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFL and EEFL) for special purposes not exceeding (per lamp): No limitation of use until 31 December 2011; 3,5 mg may be used per lamp after 31 December 2011, No limitation of use until 31 December 2011; 5 mg may be used per lamp after 31 December 2011, No limitation of use until 31 December 2011; 13 mg may be used per lamp after 31 December 2011, Mercury in other low pressure discharge lamps (per lamp). Consultation with the relevant stakeholders should be carried out and specific account should be taken of the potential impact on SMEs. 1. Paragraph 1 shall not apply to cables or spare parts for the repair, the reuse, the updating of functionalities or upgrading of capacity of the following: EEE placed on the market before 1 July 2006; medical devices placed on the market before 22 July 2014; in vitro diagnostic medical devices placed on the market before 22 July 2016; monitoring and control instruments placed on the market before 22 July 2014; industrial monitoring and control instruments placed on the market before 22 July 2017; EEE which benefited from an exemption and which was placed on the market before that exemption expired as far as that specific exemption is concerned. A single technical documentation may be drawn up. A single technical documentation may be drawn up; manufacturers keep the technical documentation and the EU declaration of conformity for 10 years after the EEE has been placed on the market; manufacturers ensure that procedures are in place for series production to remain in conformity. 予想、回顧、データ分析などに関するブログのトラックバック集 7. cooperate with the competent national authorities, at their request, on any action taken to ensure compliance with this Directive of EEE covered by their mandate. The EU declaration of conformity shall state that it has been demonstrated that the requirements specified in Article 4 have been met. 1. This Directive supplements the general Union waste management legislation, such as Directive 2008/98/EC and Regulation (EC) No 1907/2006. A number of substantial changes are to be made to Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (4). 第56回夏季セミナー第1回講話（2011年8月11日 92min） 2011年ひかりの輪夏季セミナーにおける第1回講話です。 この講話では、以下の点について具体的に語られています。 1.輪の思想とその歴史 輪の思想は様々な宗教・文化に共通する普遍的な智恵・真理 2. 人気馬を中心に、競馬ブログの予想考察に関する記事を、どんどんトラックバックして下さい。, ３才牝馬三冠馬デアリングタクト、３才牡馬三冠馬コントレイル、そして２年前３才牝馬三冠馬でありG１レース８冠アーモンドアイ、トリプル対決が実現！！ Lead in solders of high performance infrared imaging modules to detect in the range 8-14 μm. 6. The Resolution stresses that the use of cadmium should be limited to cases where suitable alternatives do not exist. The decision of revocation shall put an end to the delegation of the powers specified in that decision. Review and amendment of list of restricted substances in Annex II. The measures are necessary to achieve the chosen level of protection of human health and the environment, with due respect for the precautionary principle, and having regard to the risks which the absence of measures would be likely to create in the Union. 1. Lead in shielding for ionising radiation. 3. manufacturers have the possibility to appoint an authorised representative by written mandate. Rules and conditions for affixing the CE marking. #56 July 12th, 2011. Those powers should be exercised in accordance with Regulation (EU) No 182/2011 of the European Parliament and of the Council of 16 February 2011 laying down the rules and general principles concerning mechanisms for control by Member States of the Commission’s exercise of implementing powers (17). It is of particular importance that the Commission carry out appropriate consultations during its preparatory work, including at expert level. 3. The obligation to transpose the provisions which are unchanged arises under the earlier Directive. T12): 5 mg, Expires on 31 December 2012; 3,5 mg may be used per lamp after 31 December 2012, Tri-band phosphor with long lifetime (≥ 25 000 h): 8 mg, Expires on 31 December 2011; 5 mg may be used per lamp after 31 December 2011. 第66回桜花賞(SI)に関する The available evidence indicates that measures on the collection, treatment, recycling and disposal of waste EEE as set out in Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE) (8) are necessary to reduce the waste management problems associated with the heavy metals and flame retardants concerned. Without prejudice to Article 4(3) and 4(4), Member States shall provide that EEE that was outside the scope of Directive 2002/95/EC, but which would not comply with this Directive, may nevertheless continue to be made available on the market until 22 July 2019. In accordance with paragraph 34 of the Interinstitutional Agreement on better law-making (18), Member States are encouraged to draw up, for themselves and in the interests of the Union, their own tables, which will, as far as possible, illustrate the correlation between this Directive and their transposition measures, and to make those tables public.